3D Printed Custom Model Truck Digital Clock & Alarm

This truck has a 3D printed shell with a clock/alarm kit shell inside. The back slides out to give access to alarm clock buttons to set alarms, switch display, and update time.

Neccessary Supplies

1. 106.59g of 3D Print Fillament (PLA recommended)
2. Acrylic and/or Spray Paint
3. Alarm Clock Amazon Kit

Tools Needed

1. Access to 3D Printer
2. Paint Brushes
3. Soldering Iron, to put together kit

Load your fillament into your 3D printed and print the file "custom truck alarm clock_.stl". No adjustments are neccessary in scale or printer settings.

While printing, use a soldering iron and attached directions to complete the alarm clock kit. The plastic case that arrives with the kit is not neccessary for this build.

Paint your truck as desired. Make sure to use 2-3 coats of paint. Optionally, add a clear coat seal. Then, assemble the truck. Feed the cable through the small circular hole at the back of the truck. Then, slide your alarm clock into the trailer of the truck until the clicks into place. At this point, adjust and time on the clock by following kit instructions. Finally, slide the door into place and you are finished!