3D Printed Forklift Wireless Charger – Functional, Fun & Easy to Build

Bring your desk to life with this creative and functional 3D Printed Forklift Wireless Charger, designed around the Bambu Lab Wireless Charger Kit-K012. This build combines motion, lights, and Wireless charging into one eye-catching desktop accessory that’s also fully practical.

Whether you're looking for a unique project, a gift idea, or a smart way to charge your phone, this model delivers on all fronts.

1. Required Hardware (Included in the Bambu Lab Wireless Charger Kit K012)
2. 8x M2×5mm screws (kit includes 7, only 3 needed for circuit board)
3. 10x M2×6mm screws
4. 8x M2×12mm screws
5. 2x M1.6×3mm screws (for motor)
6. 5x Dowel pins (cut one in half for gear/mast setup)
7. 2x Long LED wire lights
8. USB-C cable
9. 3D Printed parts

1. Total print time: Under 5 hours on a Bambu Lab P1S
2. Designed for easy printing with minimal supports
3. Customize colors in Bambu Studio using Assembly View

Recommended filament: PLA or PETG

Consider PETG for better heat resistance

1. Assembly time: 10–15 minutes
2. Use a screwdriver only — no glue required
3. All screws and components are standard and included in the kit

Follow the video guide and PDF instructions (below) for clear, step-by-step assembly.

1. Connect the USB-C cable
2. Place your phone on the forks
3. Charging starts automatically

Modes Supported:

1. Mode 1 & 2: Charging + animated mast movement + LED lights
2. Mode 7: Phone stand only (no motion or lights)

Press the button on the back to switch between modes.

The kit supports High and Low Power Modes

PLA may soften at high temps — monitor during first few charges

For safer results with PLA, consider using Low Power Mode

📥 Download STL and model files:

👉 https://makerworld.com/en/models/1599842-forklift-wireless-charger

📺 Watch the full build video

That’s it! You now have a functional and fun 3D printed forklift wireless charger — a great addition to your desk or maker space.

If you try this build, I’d love to hear your thoughts!

💬 Feel free to leave feedback, questions, or suggestions in the comments below.

👉 If you make your own version, share a photo — I’d be thrilled to see your take on it.

Enjoy building, printing, and charging! 🚜⚡