3D Trophy

This is a trophy made with Onshape
Supplies
.png)
https://www.onshape.com/en/
Sketch Trophy
.png)
Make a sketch of the trophy.
Revolve Trophy
.png)
Use revolve on the top part of sketch 1.
Extrude Base
.png)
Extrude the other part of sketch 1.
Sketch Text
.png)
Add text for the front of the trophy.
Exdrude Text
.png)
Extrude the text
Sketch and Extrude Text Frame

Sketch the text frame on the trophy and extrude.
Sketch and Revolve Trophy Handles

Sketch and revolve the trophy handles
Sketch and Extrude Trophy Lower Base



Sketch and extrude the trophy lower base, they should be different sized SQUARE
Sketch Design to Be Loft


Sketch a design to be extrude and loft on the top plane, use section view to see your sketch clearly, I also used the circular pattern tool to make the 5 other profiles.
Extrude Design

Extrude design up to part 1, so it will stop when it hits part 1(trophy)
Sketch Profiles to Be Lofted


Sketch profile to be loft, I sketched a profile on top of one of the base of the trophy and i also made another profile on a offset plane.
Loft

Loft, select the face of extruded part (From Step 10) and sketches(From Step 11) as loft profile.
Six Times.
FINISHED




You're done !! (My handle kinda fell off)