Amazing Money Printer

Want to be cool to your friends, Youtube fans, etc.? This is a cool project that is easy to build, plus only requires very simple items!

Any color is fine, but black works best in this case. If you do not have a duplex printer, you may print one side and put the sheet back in the printer and print the other side.

Cut the paper into two strips. I am using a paper cutter, if you don't have one, you may use scissors. Also, trim off the sides so that the white part is not shown.

Make a long strip of paper by taping the two strips together.

Tape the strip, then roll it up into a stick, I am using a pencil, you may use any stick that is long enough. Leave at least an inch unrolled to make the next step easier.

Roll the end to another stick shown in the picture. It must be rolled like shown in picture.

You may make a cardboard case, wooden case, or whatever case that fits. If needed, place a base board.

Insert a dollar bill and turn the stick. Call the end the knob. Turn the knob so the dollar bill will go all the way inside.

Place a paper on the opposite side that you placed the dollar. Then turn the knob and there comes the dollar bill! Now show off to your friends by doing Step 7 and this step.