Autumn Wind Blow Wire Tree

Materials:

1. Copper Wire 22 gauge (855 metre)
2. Cooking pot or any thing having diameter of 33 cm.
3. Masking tape
4. Wire cutter.
5. Wool gloves (just to protect the hand from harshness).

1. Wrap the wire around cooking pot.
2. Take it off.
3. Cut from one side.
4. Make it straight.
5. Take only 6 wires.
6. Measure 15 inches from one side and twist this part.
7. Do this to all rest of the wires.

1. Now grab all the wires together and twist them all together (only that 15 inches part).
2. Split for the branches. At first I have make 3 main branches.
3. Split again and again.

1. Tie the last end with masking tape so they don't open.
2. Now set the direction of main branches.
3. Then start splitting them till the end of corners. Just grab bunch of wire and twist them till the end, don't split them two much they will make mess.

1. Open masking tape from the end.
2. Split the wires for roots same as we did for branches.
3. Now twist small portion and take out some wires from both sides and again twist, again take out some wire. Do this till end.
4. Twist the side wires and spit them from the end.
5. Finally move the branches to one side like wind turn them.

I hope you liked this tutorial. If you have any suggestion and question feel free to ask.