Sniper Rifle

by K-Dawg in Living > LEGO & K'NEX

9144 Views, 22 Favorites, 0 Comments

Sniper Rifle

P1010518.JPG
HERE IT IS!!!!! My 5 shot sniper rifle. I made a few changes since the slide show, like a new trigger,and upgrading the strength a bit. Well then lets get started. If you get stuck ask me in the comments.

CHECK OUT THE NEW SIDE ARM https://www.instructables.com/id/The-Rhino-Pistol/

Bi-pod

P1010424.JPG
P1010425.JPG
P1010426.JPG
P1010427.JPG
I dont know if this is a bi-pod. It has four stands. maybe its a quadropod any way it props up the gun. Its pretty simple to make just follow the pics!

Mag

P1010429.JPG
P1010430.JPG
P1010433.JPG
P1010434.JPG
P1010435.JPG
Here is the mag also pretty easy just follow the pics.

Barrel

P1010437.JPG
P1010438.JPG
P1010439.JPG
P1010440.JPG
P1010441.JPG
P1010442.JPG
P1010443.JPG
P1010444.JPG
P1010445.JPG
P1010446.JPG
P1010447.JPG
P1010448.JPG
P1010450.JPG
P1010451.JPG
P1010452.JPG
P1010453.JPG
Here is the barrel.

1.make
2.add
3.add
make 6 of these
4-5.put together like this
6.make
7.add
8.make
9.add
10.make
11.add
12.make 2 of these
13.add
14.make
15.add white rods
16.add

Stock and Handel

P1010454.JPG
P1010455.JPG
P1010456.JPG
P1010457.JPG
P1010458.JPG
P1010459.JPG
P1010460.JPG
P1010461.JPG
P1010462.JPG
This is pretty easy. Just put together. Follow the pics.

Scope

P1010463.JPG
P1010464.JPG
Simple

Trigger

P1010465.JPG
P1010466.JPG
Also simple

Main Body

P1010467.JPG
P1010468.JPG
P1010469.JPG
P1010470.JPG
P1010471.JPG
P1010472.JPG
P1010473.JPG
P1010474.JPG
P1010475.JPG
P1010476.JPG
P1010477.JPG
P1010478.JPG
P1010479.JPG
P1010480.JPG
this is confusing but if you follow the pics you should be able to make it. As I said before if you get stuck just ask me!!

Putting It Together

P1010481.JPG
P1010482.JPG
P1010483.JPG
P1010484.JPG
P1010485.JPG
P1010486.JPG
P1010487.JPG
P1010488.JPG
P1010489.JPG
P1010490.JPG
P1010491.JPG
P1010492.JPG
P1010493.JPG
P1010494.JPG
P1010495.JPG
P1010496.JPG
P1010497.JPG
P1010498.JPG
P1010499.JPG
P1010501.JPG
P1010502.JPG
P1010503.JPG
P1010504.JPG
P1010505.JPG
P1010505.JPG
Almost Done
1. add mag
2. add trigger
3. add stock
4. close up
5. make and add
6. aerial view
7. make and add
8. aerial view
9. add barrel
10. close up
11. add white rods for mag suport
12-13. build
14. add
15. mag pusher
16. put in mag
17. add scope
18. add bi pod or quadropod or whatever
19. connect like this
20. add connectors
21. build ram (remember to add elastic and tape well)
22. add blue rod
23. put ram into gun
24. add blue connector

Rubber Band Placement and Loading

P1010506.JPG
P1010507.JPG
P1010508.JPG
P1010510.JPG
P1010511.JPG
P1010512.JPG
P1010513.JPG
P1010514.JPG
P1010515.JPG
P1010516.JPG
P1010517.JPG
For this gun I only use 1 elastic band for the ram, but you can use more. In total you need 3 elastic bands 1 for ram, 1 for trigger and 1 for mag.

1. rubber band
2. get elastic and put 1 twist in it
3. fold over like this
4. put on gun like this

Loading: this gun has a mag that holds 5 blue rods.

5. ammo
6. put in mag
7. insert mag pusher
8. add blue rod
9. add rubber band
10. pull band over like this and connect to blue rod on opposite side.
11.add elastic for ram


YOU ARE DONE!!!!!!
HOPE YOU LIKE IT!!!!!

One More Thing

P1010518.JPG
P1010520.JPG
Image001.jpg
Wait one more thing. How to put the bi pod or what ever up.
Well all you have to do is open it and add white rods.

and one more thing people are getting confused on how to hold it well look at the pic.

HOPE YOU LIKE IT :)!!!!
Don't Forget To Rate!!!