"Building a One Sheet Boat" Alternate Building

Hello,

I build myself a "One sheet boat" like Vegra did https://www.instructables.com/member/Verga/

but with some minor changes as seen on the last pages




(btw: please ignore my grammar etc etc)

My first change was that I cut down the Support frame from Vegras Original 32 inches to nearly 28 because i was to afraid that the plywood will break

Furthermore I decided to design stronger stem and stern post.

As you can see on the photos they look like mushrooms .

Edit: Added pictures

I also changed the Chine logs.

Other than Vegra i decided to double them for more Stabillity and damage consumption :)

See on fotos

At least I did some paranoid sealage work and some Beauty work

Sealant was Sikaflex for dockapplications

Edit: Added pictures.

I choosed for:

The inside white, the outside transparent and for the bottom dark grey Acrylic resin wich i got from a lokal diy store
I also added some covers for the stem post as you can see underneath.

The build time was a full month and I did it with my dad in the garage.

Also Thanks to Vegra for a nice instructables with no open questions to the project.

Here is the requested in action Photo :)

As you can see i added the Water line in blue and the top egde and the lower egde in red.