Bullet Effects on Scale Models

Hi guys!
And Girls!
And... others :D

Today I'm going to explain you how to make very easy and cool bullet effects on your scale model ;)



On the picture: Stug III ausf G by Tamiya - 1/35 scale

You are going to use very poor materials, let's see what:

1 - Scale model (of course)
2 - Exacto knife with a bit tip (See images for references)
3 - Matt Gun Metal (Any brand will do the trick)

You will work with a sharp knife that will automatically hurt your fingers so BE CAREFUL, use protections and enjoy this Instructable ;)

You are going to add some machinegun and other low caliber shots on your vehicle therefore be careful to what I'm saying:
Because of the thick armour of tanks (and other armored vehicles) a normal bullet WON'T penetrate the chassis, so don't force through your exacto knife because this will create a non realistic hit.
Take few minutes and visit the fantastic world of "The Internet" to check how thicker is the real armour of your vehicle, you won't regret that ;)

Another important thing: if you are going to place your model in a diorama just check were enemies are: if their minifigures are on the ground you will do some bullet hits at a man-height. Otherwise, if enemies are placed on the top of a building you will need to add bullet hits on the top of your vehicle.
So remember: check and compare the minifigures height with your model.

Now let's work!
After studying your model and your diorama it's time to get in action:

1 - Choose a place where hit your model and start gently to push and rotate.

2 - After marking a little bit, start to press and rotate harder (not too much, you won't pierce side by side): Now you have your bullet hit!

3 - Now dip your exacto knife's bit in the metallic grey and plant the coloured bit where you have done your bullet hit.

4 - Check if it's how you like it. If not, quickly take a piece of wet cotton and rub it on the model, this will erase the color.

Pro tip:

Check on the Internet for realistic bullet hits on armoured vehicle and try to replicate them ;)

If you like your work, let it dry for a few hours!
Just for your delight check out other types of bullet hits on my model ;)

If you liked this instructables, please feel free to comment, I will be glad to answer you as fast as possible ;)

Auf Wiedersehen,
MattJKF