Chain Maille Ring Maker Mini Sized

If you make the Chain maille and hate that huge contraption and just want a portable option then look no further than here.

NOTE: This is for chain links that you want very small and for a tight weave!!!!!

 This is my second instructable so feel free to comment about how well i did or if i didnt do a good job so i can improve if needed.

Ok all you need is

a peice of copper pipe(i prefer the L shape or T shape fitting it makes it last longer)

A Nail
Like those long and pretty thick nails it must be almost unbendable using bare hands

OR instead of a Nail you can substitute a metal rod your call

A hammer

A hack saw or some thing that can take the head off the nail. you can also use big bolt cutters

Super glue

A hitting surface i have a anvil so im set.

IF you dont know what the head of a nail is then it is on the left side of my fingers

 

I used a copper pipe for the one on the opening page and its about to break at where its bent at a 90 degree angle so i would strongly suggest pipe fittings made of copper

ok first take the copper fitting and put it like the one in picture 1

NOW take it and hammer the copper flat so it makes a crank with the copper fitting

MAKE sure there is a space here like in picture #2 cause that is where you insert the wire.

The end result should look like picture #3(dont freak out i had one premade cause i have 2 for 2 different sizes)

I used super glue and it works for me


Put super glue here and apply it liberaly cause you dont want this slipping or coming loose. 

Ok this is very simple

THIS video is easy to follow.


If you have to download this then sorry for the inconvenence(cant spell) 

A good site to visit to get alot of good pictures and weave instructions is here

http://www.mailleartisans.org/

just go to library and then go to weaves if you are a beginer to this art then start with european 4 in 1.

Hope you will find this helpful