Computer Build Step-By-Step

This is a Step-By-Step on how to build a PC

Motherboard, CPU, CPU Cooler, Thermal Paste, Case, Power Supply, Fan, Speaker

Step 1: You need the CPU, and the Motherboard for this step. Put the CPU in the CPU socket. Make Sure the CPU and the CPU socket are aligned correctly or the CPU and the pins in the CPU socket could be damged.

Step 2: You just need thermal paste for this. Push the thermal paste on the CPU in a pea sized shape so its not to much and not to little.

Step 3: You need the CPU cooler and the Motherboard. There should be 4 holes around the CPU align the CPU cooler to those holes. Turn the arrows so they are facing the left and then push down on the arrowed buttons so they lock in place.

Step 4: Just need the RAM plus the Motherboard. Place the RAM in the RAM slot by lifting up the lever and placing it in. make sure everything is aligned correctly or it will not work and you might brake the RAM. Also make sure to Place the Ram in the closest slot to the CPU.

Step 5: You need the Power Supply and the case. Align the Power supply to the rectangle shape on the back of the case. Then align the screw holes from the case and the power supply screw holes together. Then after your done screw in the screws tightly so the power supply doesn't wiggle around.

Step 6: You need motherboard and case. Connect motherboard to case by aligning the HDMI and audio connector on the side of the motherboard to the PC case.

Step 7: Screw fan into the correct area so the screws align and so you can plug this fan into the motherboard.

Step 8: You need the power supply cords and the motherboard. Hook up the 24 pin to the 24 pin connector. Make sure that the 24 pin is faced correctly so the little slot at the front of the 24 pin connects(Do this for both pins). Next but 4/4 pin in 8 pin slot. Connect speaker to the slot in the image. For the power LED and other cords connected to the speaker use a image on google to put in correctly but if you look closely in the image there are the top ones. Connect the HD audio to the lower left corner of the motherboard, if you don't know where it is in the image above. Connect the CPU cooler cords to the spots in the top right. Also there might be some cords that don't connect. That is fine just make sure you connect the cords in the images above.

Step 9: You need the front and back of the case. Screw both ends of the case so its aligned and all screws align so you can connect the front and back of the case so everything is sealed in side.