Connected Arm Lift, a Knex Ball Machine Lift

Hey everyone!

I present to you the second new lift from my ball machine Euphoria. The first one is here.
The Connected Arm Lift is in my opinion a cool looking lift, with a pretty low piece count.
It works very good, I've never seen a ball fall of the lift.
If you build this lift, read every image note! 

I hope you like it and have much fun with building!

~Sandroknexmaster~


video:

First you have to count the pieces.
They're all named by their original color.


RODS:

green: 81
white: 37
blue: 50
yellow: 48
red: 88
grey: 46

Total rods: 350

CONNECTORS

dark-grey: 15
light-grey: 2
orange: 48
red: 10
green: 26
yellow: 39
white: 11
purple: 89
blue: 23

Total connectors: 263

OTHER PARTS

tan clip: 3
Y-clip: 6
blue spacer: 27
silver spacer: 76
small blue gear: 1
medium yellow gear: 1
medium hub: 1
medium tire: 1
green motor: 1

Total other parts: 117


GRAND TOTAL: 730

We will start building the entrance. Here the balls can enter the first arm.

Here we will build the motor section. It contains the motor, the gears and the axle.
Always slide the switch of the motor to the left.

This is the most boring part from the lift... But it's also very necessary so just build it!

The exit. Here leave the balls the last arm.

Now we will build the four arms. They pass the ball to eachother so it can get from the entrance to the exit.

This is the last part from the lift. They connect the arms and the cranks.