Crow Cane

We are constructing a build for a halloween contest coming up, which consists of 4 different pieces for the Crow Cane. And the reason we decided to choose this product over the other three is because making circles and parts on Autodesk are much more easy than the more difficult designs we did before, and the Crow Cane was just overall more simple to make because of the lego type design it uses. All in all, we chose to do the Crow Cane out of all four designs because it was the easiest design and most simple out of the four and we didn’t have to do much designing for it since it was so simple.

Equipment: 3D Printer, CAD

Tools: Autodesk

Supplies needed: Filament, epoxy gorilla glue

1. Create Autodesk document
2. Make 4 parts that includes, 3 long cylinder pieces for the body (top, mid, bottom), the pieces must taper down.
3. The last part is the crow head.
4. The parts must all have stems and openings on either side that connects to one another like lego pieces
5. Make sure to use the transform tool and measurement tool so all your pieces align perfectly.
6. You can include an eye piece
7. ------------------------------------------------------------------
8. Lastly 3d print all the pieces and connect them together with epoxy gorilla glue to make your crow cane.