DIY AC 3-Pin Socket Tester

AC 3-Pin Socket Testers are very simple electrical circuit testing tools. Just plug-in the tester and turn on the switch of the socket, the LEDs will detect any probable simple faults that the circuit might have.

Materials Required:-

1. A 10 A 3-pin socket - 1 piece.
2. 47K, 1 or 2 W (preferably 2 W) resistors - 3 pieces.
3. 1N4007 diode - 3 pieces.
4. 5mm LEDs ( Red, Green & Blue) - 1 piece each colour.
5. Insulated connecting wires (if required).
6. Soldering iron.
7. Solder.
8. PVC box (optional) [ You can also drill holes into the socket and make everything inside it]

Red/ Green/ Blue/ Fault

ON ON OFF All OK

ON OFF OFF Missing Earth

OFF ON ON Live-Earth Reversed

ON OFF ON Live-Neutral Reversed

OFF ON OFF Missing Neutral

OFF OFF OFF Missing Live/ Missing Neutral & Earth

Due to the high heat generated, a 2W resistor is preferred. If the LED glows dim, change the resistor value to a lower value or vice versa.

My PCB is designed using www.easyeda.com .

Make changes according to your needs.

Develop PCBs at www.jlcpcb.com

The PCBs will be provided if you need (contact for buying), but you can develop yours too.

You can omit PCB by directly soldering inside the socket, or use a veroboard.

Contact me on: Gmail: arijitkrhaldar@gmail.com

Instagram: www.instagram.com/arijit.4.u

For any queries or discussions.