DIY Wood Case for Arduino LCD Shield

This is an upgrade for my project "DIY Arduino LCD shield" go check out how to make the shield at my channel!

This is an easy project to make, you only need 2 parts and some tools.

You only need 2 parts for this project and some tools.

The bolts I used was 4cm but they are to long, I think 3cm is perfect.

you need:

wood plate

4x nuts

8x bolts

Cut out 2 same size plate for the case top and bottom. The case can be as big as you want it to be, but mine is L9,5cm x H6,5cm

Hold the LCD on the wood and mark where you want the hole, than cut out where the LCD is going to stick out.

drill holes that the screw fits in at every corner on the top and bottom plate.

Put the screws in the holes and screw it all together. You can paint it a nice color to.

thanks for watching! go check out my other projects to :)