Diy Fan

I made a fan out of a couple materials I was going to throw away inclduing a Old drone that didn't work anymore and some broken pencils but instead made a fan with a handle and cools you down really well in the summer.

1) Double A (AA) Battery

2)Hot Glue gun with hot glue sticks

3)Pencil

4)Electrical tape or hobby tape

5)Old drone propeler or drone propeler

First fray the end of the wires on the drone propeller.

Then hot glue the bottom of the propeller onto the battery and make sure you don't Hot Glue anything that interfears with the motors gears or the motor itself.

Then tape the wire to the end of the battery as well as the other side to but keep it open and not fully taped for if you do this the motor will spin.

Then hot glue the pencil on and tape it a little for extra support and it is done.

To use push the wire on the end of the battery and tape it there and you have a working diy fan.