Dohome&Homekit Bulb

Hello, Sibo Zhilian has launched a bulb lamp that supports both dohome and homekit.

For IOS users, homekit in the user manual is very convenient.

For all (IOS and Android) users, dohome app can be used to control intelligent devices, supporting functions such as timing, countdown, brightness adjustment and dynamic scene, as well as the following intelligent audio Alexa, Google assistant, tmall, Xiaomi, Baidu and dingdong. Come and start an intelligent interactive game with your favorite lamps.

You can get the bulb from here.

Link：

https://www.aliexpress.com/item/4000179930244.html?spm=2114.12010612.8148356.8.31a04e54B5SYqk

Scan the QR code above or search “DoHome” in APP store for iOS version or Google Play for Android version

Step 1:Log in and sign up your DoHome APP;

Step 2:Confirm the phone is connected to WiFi (ONLY support 2.4G WiFi network), and click the upper right corner “+” icon in DoHome APP;

Step 3:Select corresponding Wi-Fi bulb device icon;

Step 4:Input the router password;

Step 5:Power on the bulb,and confirm that the bulb is in the factory mode (White Flash);

Step 6:Open phone's WiFi setting page and connect the WiFi named “DoHome_XXXX”;

Step 7:Return to “DoHome APP” and wait the network configuration finish-ing;

Power on/off the device for three times . If the device is flashing ( light is white), that means the device in factory mode.

1.Please add device in the DoHome APP (refer to "Add Device" on the back).

2.Enter the device property interface and click to open HomeKit Mode.

3.Open Home APP in your iPhone, click “add accessory”,input default password (123-45-678) showed on picture below into camera aperture. Click “ still add”,wait for the encryp- tion check (about 50 seconds), then you have added the device to Home APP successfully.

Note：

If the device cannot identify original password,please click the button “ Don’t have a code or cannot scan” choose the device you want to add, click “still add”,and input default password:12345678,wait for the encryption check (about 50 seconds),then the device is added successfully.If your iPhone does not show any device at all, please make sure the device and your iPhone are connected to the same wifi network.If you still cannot add the device,please look for solutions from FAQ sections below,or contact our tech support team.

Please open the menu on the upper left corner, click the button with a speaker icon, and look for user’s guide.

Note:

Before using the smart speaker, please login your own account on Amazon Alexa, Google Assistant, Tmall Genie and Xiaomi.

You can find the corresponding firmware here

If you want to develop the bulb lamp firmware yourself, you can find the corresponding protocol of dohome app here

Tech Support URL : http://support.doiting.com