Drummer Dude Automata

Hello in this instructable i'm going to be showing you how to build a Drumming Dude Automata.

Materials you will need:

wood
Wood sticks

Spray paint

Coloured wool

Man

Pipe

Plastic lid

Glu tac

Tape

Glue

Screws

Nails

Wood rod

Tools you will need:

Hacksaw
Saw

Hammer Drill

Jigsaw

Screwdriver

Now you use your saw to cut your wood to the size you want it. We cut the floorboards with a saw to the size we wanted them (we did 30 x 26 x 13, L x W x D).

Secondly you glue two pieces together for the top and bottom of the box. you use the wood glue for this part.

Next you drill holes in the sides of the box so your rod will fit through.

Next use the jigsaw to cut out your cams to the size you want them. We actually used a circular rod because a rectangle rod wouldn't spin that well.

get your pipe and cut it with the hacksaw, to the right size for your man. Then we put the plastic cap on the top and don’t forget to make drumsticks .

Next you screw half the box together. Before you do this make sure to drill guides for the screws to go through.

Next you paint the box, cams and the pipe what ever colour you want it. you can either use spray paint or normal paint we recommend spray paint.

Then you make the drum by putting the plastic on the top of the drum.

Next you put the box together with the cam and rod inside.

Then you glue the man and the drum on the wooden box. use the wood glue for this.

After you finished all the mechanical stuff you can start making it look stunning. We added the finishing touches by cleaning it, doing a few paint touch ups, and painting the drumsticks.