Dual Player Minecraft House

by redacted25 in Design > Game Design

13 Views, 1 Favorites, 0 Comments

Dual Player Minecraft House

screenshot_2026-02-08_12.15.49.png

Hello, this is my first instructable and I hope this is detailed enough. This is mainly for 1.8.8 or 1.8.8 Eaglercraft *, which is what I use*, but will work in any higher version. But I am VERY limited on choices.

Supplies

screenshot_2026-02-08_08.26.46.png

These are the supplies. Sorry, you need twice as much. I was lazy and didn't want to break the other half.

The Frame

screenshot_2026-02-08_08.38.05.png
screenshot_2026-02-08_08.39.38.png

Here are the block spacings.

A Lil Bit O Detail

screenshot_2026-02-08_08.43.20.png
screenshot_2026-02-08_08.44.07.png

Take the trapdoors and place them like the first picture, then flip 'em up.

Frame Continued and More Detail

screenshot_2026-02-08_08.48.49.png
screenshot_2026-02-08_08.50.16.png
screenshot_2026-02-08_08.51.30.png

Bring the logs up one, add inverted stairs. and add trapdoors like so.

Signs, Signs, and More Signs

screenshot_2026-02-08_11.21.40.png

Add all 12 signs like this. This is the border between you and your friends' space.

Floor It.

screenshot_2026-02-08_11.24.13.png
screenshot_2026-02-08_11.26.22.png

Raise the logs by one and fill in the space between the logs like so.

Stairs-n-fences

screenshot_2026-02-08_11.31.18.png
screenshot_2026-02-08_11.31.24.png
screenshot_2026-02-08_11.31.29.png
screenshot_2026-02-08_11.32.25.png

Make your stairs four blocks wide (should fit between the logs) and on the back of that one, invert another stair, then repeat. for the fences, make it from the log, four blocks out, then three, two, one. Copy that on the other side too.

House Framing

screenshot_2026-02-08_11.35.57.png

bring the logs up by 2

Some Exterior Decor

screenshot_2026-02-08_11.37.40.png
screenshot_2026-02-08_11.37.27.png

add fencies like so with oak leaves.

House Walls

screenshot_2026-02-08_11.40.08.png
screenshot_2026-02-08_11.40.35.png

add the walls like so

Glass, Doors, and Pressure Plates

screenshot_2026-02-08_11.42.19.png
screenshot_2026-02-08_11.42.59.png

Add glass in the empty spots, add spruce doors on ither side, and add pressure plates on both sides of both doors

Frame Continued

screenshot_2026-02-08_11.47.05.png

add the frame up one and add directional blocks like so.

MORE DETAIL

screenshot_2026-02-08_11.49.36.png
screenshot_2026-02-08_11.50.40.png

Around the perimeter (the same height as the glass) on every corner, add a flipped-up trapdoor. Then, above that, place an upside-down stair block.

Starting the Roof

screenshot_2026-02-08_11.54.04.png
screenshot_2026-02-08_11.56.59.png

add one log up, then add around those logs rightside-up stairs.

Attic Floor

screenshot_2026-02-08_12.00.14.png

add planks, LEAVE THE HOLES THERE, VERRY IMPORTANT LATER

Roof Continued

screenshot_2026-02-08_12.04.43.png

go one more step up

Final Roof Step

screenshot_2026-02-08_12.08.53.png

go one step up and stop there, i will need to do some detailing.

Final Roof Details

screenshot_2026-02-08_12.13.32.png

add this.

Lighting

screenshot_2026-02-08_12.15.49.png
screenshot_2026-02-08_12.17.24.png

add lighting.

YOUR DONE!!! :)

you did it, yaaaaayyyyyy!!! have fun.