ESp32-js-dos-

Hey Guys Its me duck-dev781 now I would like to talk about my project on GitHub ESp32-js-dos- on purpus I didn't give the wireing becuase this was ment for the esp32 board wrover e witch has its own SD card slot witch I hopefully got the right pins any way if you don't have the wrover e module use an SD card sdmmc module and assign pins to SD interface:

SD_MMC 1-bit

CMD = GPIO15

CLK = GPIO14

D0 = GPIO2

as this is how the main ino is setup OR you can change the pins wile in Arduino ide witch really Disney effect anything! becuase the SD mounts its self wile connected so the whole board can use it with our individual setups any ways the git link is at here Thank You! I'll also drop the file needed here I can only upload the ino for now but the sdroot is in the realises on my github. note the SD root file is a trusty substantue I used wile testing copy all files from sdroot foler onto the SD and load it in the slot and load the ino in Arduino and flash! also you can change the AP pass and name to what ever you like in the ino there is a plain and simple non patched version of the SD root in the sorce code in the sdroot folder note you must put your own DOWLOAD of js-dos v8 and use your own js-dos bundles there's also some images you can view on the GitHub as well

use github repo here

use GitHub acount here

simple and easy take the main ino on the GitHub repo open Arduino ide flash take the SD root zip in GitHub in the realesed tab and load extract then load on the SD MAKE SURE THE FIRST FOLDER IS Dos! on the root NOTHING ELSE must be in fat 32 format too I left an image of the already setup zip file