Enderman Head

I have created a 3D-printed, light-up enderman head. The 3D-printed Enderman head is designed to closely resemble the actual Enderman character from Minecraft. The exterior is made from filament and coated with black paint, while the eyes are highlighted in purple. Inside the head, LED lights will be included, capable of displaying various colors and motion patterns. This design aims to provide an accurate and wearable replica of an Enderman's head. The combination of detailed exterior and dynamic lighting enhances the overall experience for fans of the game.

1. 3D Printer
2. Super Glue
3. Paint
4. 3D Modeling Program
5. Black Mesh
6. LED Strip
7. Battery Pack
8. Filament (PETG Recommended)

Create a cube with the dimensions of 5.75x5.75x5.75in. (This will serve as the base for all of the other pieces.)

For the bottom back two pieces, cut a piece out which is .50in away from the back and from the side (It does not matter which side, as long as two sides get completely cut).

Repeat the same process for the front left part. After you make the first cut, cut out another piece on the front part of the newly created shape. It should be 2.53in tall and 1.43in wide.

Do the same exact process as steps 2 and 3 but make the cut from step three on the opposite side.

For the back two pieces on the top, use the same base as in step 1 and the same process as step 2; however, instead of cutting all the way through, only cut 5.25in through.

For the top right piece, do the same process as step 5, but then cut a piece out on the front that is 5.25in wide and 1.44in tall

Do the same process as steps 5 and 6, but cut on the opposite side of what you did in step 6.

Print out and assemble the full head, as well as paint the full head black.

Insert the mesh on the inside of the head to cover the hole.

Use two shades of purple paint to draw the eyes.

Put the LED Light Strip inside the head as shown.