now to make Epoxy Jewelry

Epoxy and some thing put in it

So first, you wanna get all your supplies. So you really just need resin and then the, hardener that will, make it to it. Yeah. Well and then you need whatever you're gonna put in it. I found a moth that was in great condition, so that's what I use.

So first, you want to mix the epoxy and hardener in in a small plastic container that you don't mind throwing away or getting ruined because using glass would be a terrible idea because then it would harden and then you'd you just have to get rid of the thing. So just I even you can even use, like, a bottle cap that's big enough. And you want to get it for the right amount. What I use, because it's small, is just get the bottle cap of the resin and pour it in at the same height and like, right at the top, and then do that with the exact same height with the hardener. And then I poured them both into the bottle cap.

And you can get a toothpick, a popsicle stick, really anything that you can mix it. Mix it for, about, like, two to two and a half minutes and until it's fully mixed, and then pour a small layer on the bottom of whatever you're and then you can set your object on top of that layer. When you make things with epoxy, it takes time.

After that, wait about a day until the first layer is hot and then pour it over again and do that same process of mixing. And do that a couple of times until everything that you have in the epoxy is pre submerged. And then, yeah, and wait twenty four hours in between each pour. And then at the end, you'll have a fully sealed resin thing.