Fun Wood Coasters Using Laser Cutter
by fxiao in Workshop > Laser Cutting
2760 Views, 13 Favorites, 0 Comments
Fun Wood Coasters Using Laser Cutter
Made this at Techshop.ws
You will need:
Plank of wood
Laser cutter/etcher
Some wood cutting tools -- I used the vertical band saw
A few images with a common theme
You will need:
Plank of wood
Laser cutter/etcher
Some wood cutting tools -- I used the vertical band saw
A few images with a common theme
Create Your Coasters on Illustrator and Laser the Images
4in by 4in is a good size
Design your coasters however you like. Would be good to stick with a theme here.
Download my .ai file in the attached section if you'd like to use it.
For rastering - 75 speed/ 90 power
Design your coasters however you like. Would be good to stick with a theme here.
Download my .ai file in the attached section if you'd like to use it.
For rastering - 75 speed/ 90 power
Downloads
Cut Out the Squares
Cut out your coasters by following the square lines you rastered
Lastly, Sand Down the Edges
Lastly, sand down the edges and round the corners.
No more cup imprints on your coffee tables!
No more cup imprints on your coffee tables!