Galaxy Dragon

In this Instructable, I am going to talk about how I made the galaxy dragon. Before we start, here's what you should know. The project took about 7 days to create. It’s a long but fun projet and really cool to make! But why did I make it? I make it because I wanted to make something big for my room so that when someone walk into my room, they could see it and say WOW it so stunning and ravishing! I also make it for pure fun and it was really entertaining to make.

Supplies

Glue gun

pencil

scissors

toilet paper

paper

ruler

cardboard

paint ( purple,blue, black and green)

scissors

Paint brush

hand paper

liquid glue

Head 1

First, draw the measurement of the head on the cardboard 4cm, 20cm, 23cm and 9cm ( like this picture above).
Draw the bottom of the head on the cardboard 3.5cm, 5cm, 23cm and 15cm
Draw the top of the head on the cardboard 8cm, 5cm, 23cm and 8cm
Cut all the piece and put them together on the 23cm
Cut 10 stripes of cardboard with these dimentions 1,5 and 30cm and stick them on the end of the head
Fold the stipes and glue it on the top of the head
Bend the other side and stick it on the edge of the head after cut off the excess
Do the same thing on the other side ( the bottom)
Tak some handpaper and fold it in balls
Put it inside the head filled the head completely until there is no more space(take all the handpaper that you need)

Head 2

Filled a cup with water and glue, mixed until its a bit white (homemade Mod Podge)
Take some toilet paper and place it horizontally on one side of the head
dip a brush into the Mod Podge and tap it onto the toilet paper (tap until the toilet paper stick to the head
Do it 4 times and do the other side after
let it dry until its hard
Paint the head and let it dry

Eyes

Draw the eyes of your dragon on a piece of paper
Cut it and stick it on the head of your dragon whit hot glue
Paint the outline with black to make the eyes stand out

Horns

Take a sheet of paper and cut it in half
Rool them to make cones, stick them and cut what goes beyond
Cut the top of the two cones
Place it and stick it to make it lean to the side
Take your Mod podge and toilet paper and do the same thing as the head but only once
Let it dry until they get hard
Place them on top of the head and glue it with hot glue
Paint them brown

Body 1

First, draw the measurement of the body on the cardboard 9cm, 20.5cm, 60cm and 5.5cm ( like this picture above).
Draw the top of the body on the cardboard 8,5cm, 13cm, 60cm and 5,5cm
Cut all the pieces and put them together on the 60cm
Cut 15 stripes of cardboard with these dimentions 1,5 and 60cm and stick them on the end of the body
Bend the stipes and glue it on the top of the body
Bend the other side and stick it on the edge of the body after cut off the excess
Tak some handpaper and fold it in balls
Put it inside the body filled it completely until there is no more space (take all the handpaper that you need)

Body 2

Filled a cup with water and glue, mixed until its a bit white (homemade Mod Podge)
Take some toilet paper and place it horizontally on one side of the body
dip a brush into the Mod Podge and tap it onto the toilet paper (tap until the toilet paper stick to the body)
Do it 4 times
let it dry until its hard
Paint the body and let it dry

Scales

Cut 5 scales the same size,1 little bit smaller and another one verry small (total of 7)
Do one layer of Mod pode and let it dry
Stick them with hotglue to the 7 bigest scales to the smaller one with hot glue
Pain them