Hack124x768's Pump Action Rifle (Step by Step)

by koolkidd in Living > LEGO & K'NEX

11005 Views, 34 Favorites, 0 Comments

Hack124x768's Pump Action Rifle (Step by Step)

C:\Documents and Settings\Owner\My Documents\My Pictures\Pump action rifle.jpg
Hi. I made Hack124x768's pump action rifle and liked it a lot, but a lot of people (including me), couldn't figure out this gun, so I made this instructable which includes everything. Hope this helps. Here is the original instructable. Please comment and don't forget to rate!

Piece List

david knex 131.jpg
Connectors
Red-21
White-24
Yellow-30
Gray-60
Light gray-3
Green-40
Orange-32
Rods:
Red-3
Tan-1
Green-98
White-63
Blue-20
Yellow-14
Gray-5
Other:
Blue Hinge Half-1
Black Hinge Half-1
Blue spacers-7
Tan clips-7
Small rubberband-1
Normal rubberband-1
Large rubberband-1

*Numbers subject to counting errors

Hopper

david knex 132.jpg
david knex 133.jpg
david knex 134.jpg
david knex 135.jpg
david knex 136.jpg
david knex 155.jpg
This is the hopper.

1. Make this
2. And this
3. 2 of these
4. Connect
5. Connect
6. Add these

Trigger

david knex 139.jpg
david knex 138.jpg
david knex 141.jpg
david knex 143.jpg
david knex 144.jpg
david knex 145.jpg
david knex 146.jpg
Make the trigger.

1. Make this
2. 2 of these
3. 2 of these
4. Add blue rods and orange connectors on ONE of them
5. Add a piece from picture 2
6. Insert piece from picture 1
7. Other piece from picture 2
8. Other piece from picture 3

Pump

david knex 147.jpg
david knex 148.jpg
david knex 149.jpg
david knex 151.jpg
david knex 152.jpg
david knex 153.jpg
david knex 154.jpg
This is the pump.

1. Make 8
2. Put all on red rods
3. Slide one down and add extras
4. Add a white connector and gray connectors
5. Make this
6. Add a gray rod and gray connectors
7. Slide on piece from picture 5
8. Add gray rods

Firing Pins, Rubberbands, Connecting, and Frame

david knex 157.jpg
david knex 158.jpg
david knex 160.jpg
david knex 161.jpg
david knex 162.jpg
david knex 163.jpg
david knex 164.jpg
david knex 165.jpg
david knex 167.jpg
david knex 166.jpg
david knex 168.jpg
david knex 169.jpg
Refer to title

1. Add pump
2. Make this
3. Insert and add rubberband
4. Add tan rod and gray connector
5. Add orange connector and yellow rod
6. Add a rubberband (I doubled mine)
7. Make and add the front frame
8. Make this
9. Add to trigger
10. Add front frame and new pieces
11. Connect...
12. Add the other pieces
13. Add rubberband to pump

Loading and Firing

How to load and fire:

Pull back pump. Block will fall and stop firing pin. Open the "door" on the hopper and load 10 blue rods. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. Pull back pump. Block will fall and stop firing pin. Pull trigger. (Aren't I annoying?)

Have fun!!!