How to Make Non-Woven Fabric Ornaments

by thunderlaser-nolan in Workshop > Laser Cutting

20 Views, 0 Favorites, 0 Comments

How to Make Non-Woven Fabric Ornaments

non-woven fabric ornaments show.png

Let’s craft a laser cutting non-woven fabric! The non-woven fabric ornaments present intricate layers that add a unique look to your room.

Read this post and have a pleasant laser cutting time!

Supplies

Machine Used

Thunder Bolt 30W

Material Needed

1mm non-woven fabric

Settings

Cutting

  1. Speed:50mm/s
  2. Max Power:90%
  3. Min Power:10%

Place Your Non-Woven Fabric for Laser Cutting

Choose colorful non-woven fabric that you like on the laser honeycomb bed.

Before your work begins


  1. Verify the lens is clean or there's no problem in the laser.
  2. Make sure the exhaust fan is working well.
  3. Ensure the air assist is on.

Open the Ornaments File

Import the ornaments design in LightBurn and check if your non-woven fabric size is large enough.

For laser cutting fabric ornaments with a lot of elements, ensure there are no misalignments or unnecessary overlaps in the file. Double-check everything, and decide if you want to add or subtract elements according to your preferences.

Check the Laser Non-Woven Fabric Settings

non-woven fabric ornaments setting.png

Ensure that the parameters are set correctly to achieve the ideal laser cutting non-woven fabric ornaments; each layer represents a kind of color fabric. Our ornament references vases and greenery to show colorful vibrancy. You can use your non-woven fabric to create any patterns and color combinations as you like!

If the min power is too low, it will cause the stroking corners will be too shallow and the cutting corners will not cut through; if the min power is too high, it will cause the stroking to cut through the corners and the laser cutting will be bad at the corners.

Focus on the Non-Woven Fabric

Without focusing, your outcomes may fall short of expectations. So before starting, make sure you’ve rightly focused.

For focusing, you have two options: Auto Focus, which is simple—just press the AF button on the Thunder Bolt screen. Then you’re ready to have a laser cutting.

auto focus

Frame the Fabric Ornaments Design and Start Laser Cutting

When you click “Frame”, the red light will display the laser cutting area. This is a safe process, and the frame will align with the non-woven fabric. Once aligned, simply press “Start” to begin the ornaments laser cutting with the Thunder Bolt!

laser world map 3


Monitor the Laser Cutting Process

laser cutting blue non-woven fabric ornaments.png
laser cutting dark blue non-woven fabric ornaments.png

To avoid any issues, carefully monitor the laser cutting, especially when unusual conditions like alarms arise.

Considering the laser cutting energy, for safety reasons, we advise against staring directly at the process, even with the laser door closed.

Complete the Laser Non-Woven Fabric Ornaments Task

assembling non-woven fabric ornaments.png
non-woven fabric ornaments show.png

When the laser cutting night non-woven fabric ornaments is completed, it’s time to get it out. Then it’s just a fun assembly time to get the ideal non-woven fabric ornaments. Imagine the joy of assembling the non-woven fabric ornaments, as each piece clicks into place to create a beautiful, layered home decoration.

Laser cutting non-woven fabric ornaments is perfect for home, especially when you’re enjoying a family bonding moment. You can even have your private house laser engraving non-woven fabric ornaments for a one-of-a-kind room style!