How to Make a “CamsSafety” Security Camera

by kmontoya9 in Living > Homesteading

586 Views, 5 Favorites, 0 Comments

How to Make a “CamsSafety” Security Camera

IMG_1470.jpeg

In this instructable I will show you how to make a “CamsSafety” security camera. I made a security camera, which is meant to blend in with other house hold furniture! This is meant for the people with a fear of getting their house or business broken into and that just wanna feel safer, as well as their kids/ family feel safer.

Supplies

IMG_1454.jpeg
IMG_1472.jpeg
IMG_1471.jpeg
IMG_1448.jpeg
IMG_1449.jpeg
IMG_1450.jpeg
IMG_1456.jpeg
IMG_1268.jpeg
IMG_1274.jpeg
IMG_1453.jpeg
IMG_1455.jpeg
IMG_1452.jpeg
IMG_1548.jpeg

Here are the supplies I used to create the product:


Computer screen

screwdriver

random cord

2 piece computer stand

ceiling camera

tape ( box tape)

tape ( double sided)

Black box to connect computer cord too

phone holder

The Easy Basic Steps

FK0NR3WMUCWGURO.jpg
FPEPEVQMUCWGTQ8.jpg

You will first began by putting these two computer parts together. They should clip onto one another, and be locked in without any glue, tape, etc.

Attaching the Computer

IMG_1457.jpeg
FP30AEJMUCWGTL7.jpg

You will then take the computer screen, take out the handle attached to the screen, and then “hang” it onto the computer stand! Make sure it is slightly slanted down in order for it to hold and stay up and not fall back.

Quick and Easy

FDVFDU1MUCWGV3U.jpg

Then you will connect the cord that was attached to the computer screen, and connect it to the black box.

Making It Look Neat

IMG_1459.jpeg

You will then wrap the cord around your hand and hang it onto the back of the computer stand. This will ensure for it to be hidden and not look messy.

Unscrewing the Hard Things

IMG_1267.jpeg
F8JB9XMMUCWGW8H.jpg

You will then unscrew the whole camera apart, using the screw driver listed above in the supply list .

Tie It Down

IMG_1269.jpeg
IMG_1270.jpeg

You will then tie the camera around the black holder with the red and black wire, be sure to tie it tight so it doesn’t fall back! I tied it around twice to ensure it did fall back!

Sticking It Together

IMG_1272.jpeg

Then you will put double sided tape on the phone holder so you can stick the “camera piece” you made on it.

Last Final Touches

IMG_1458.jpeg
IMG_1461.jpeg
FVQP2V3MUCWGT6L.jpg

It should then look something like this! You will then add boxing tape to the front of the phone holder (as shown) to keep the camera in place so it doesn’t fall back since it’s kinda heavier.


Here is the Ai prompt I used for my final picture:

Make this item on a white desk with small green plants on the desk and make the background a modern white and grey home. Make the computer screen have a living room pov from the top as if a security camera was recording. Make the bottom Of the boarder of the screen say “CamsSafety”. Take away the tape t the top .