How to Print PCB

In this instructable you will learn how to print PCB at home at low cost..

1)Copper clad board;

2)Printed circuit board;

3)Ferric chloride(FeCl3);

4)Marker pen;

5)Board cutting tools;

6)PCB Drill;

7)Electric Iron;

8)Blade;

9)Nail polish remover;

You will find most of the thing from here:

In India PCB Designing kit-

http://www.ebay.in/itm/Ferric-Chloride-Copper-PCB-...

Outside India

Copper clade board-

http://www.ebay.com/itm/5PCS-One-Side-Copper-Clad...

http://www.ebay.com/itm/5PCS-One-Side-Copper-Clad...

Ferric Chloride-

http://www.ebay.com/itm/MG-Chemicals-Ferric-Chlor...

http://www.ebay.com/itm/MG-Chemicals-Ferric-Chlor...

PCB Drill- http://www.ebay.com/sch/i.html?_odkw=ferric+chlor...

Design your PCB circuit,

If you don't know how to design PCB circuit

Watch this video;

Basic PCB designing in EAGLE | Part 1

And also

Basic PCB designing in EAGLE | Part 2

print your circuit in a Photo paper using Leser Printer, If you have an inkjet printer, print the circuit on a simple paper and go to Xerox center and xerox it on photo paper.

Take a copper clad board and mark it as per circuit diagram and also cut it using cutting tool...

and

Scratch the copper side with a blade to remove copper sulphate.

Put the printed circuit on copper clad board and heat it for 5-10min using Electric Iron.

Then immerse it in a fresh water, wait for 5min and the remove the paper slowly.

and also put a white tape on the oposite side of the board.

Make a solution by mixing water and ferric chloride.

************Ferric chloride is harmful for tissue.

Immerse the board in this solution and Shake it, to etch the extra copper layer.

next use nail polish remover to remove the toner from the PCB.

Fix the printed board on a wood with tape nad then drill it..

Now the PCB is ready....

If you like this instructable please like and

To learn some cool projects also subscribe my youtube channel:

https://www.youtube.com/channel/UC4d1tybdUQJN3HfaN...

and also

like on

www.facebook.com/yobots