How to Make a Glowing LED Sea Shell Light
by joejoerowley in Circuits > LEDs
11236 Views, 12 Favorites, 0 Comments
How to Make a Glowing LED Sea Shell Light
Hi,
In this simple instructable I am going to show you how to create a glowing sea shell that looks really nice. It is very easy to make and very cheap.
In this simple instructable I am going to show you how to create a glowing sea shell that looks really nice. It is very easy to make and very cheap.
Materials
Materials
LED- I used a 10mm RGB self cycling LED. 15-50 Cents. You can take an LED pretty much any old electronic device or buy them online. Radio shack sells them for an arm and a leg.
Coin Cell Battery- I used the CR2032. Very Common. You can get them at radio shack or online. Even Big Grocery Stores have them. They cost any where from 20 cents a piece online to close to $5 dollars at radioshack.
Electrical tape- About 5cm. You could even use duct tape.
Shell- Any shell that is big enough to fit an LED in.
LED- I used a 10mm RGB self cycling LED. 15-50 Cents. You can take an LED pretty much any old electronic device or buy them online. Radio shack sells them for an arm and a leg.
Coin Cell Battery- I used the CR2032. Very Common. You can get them at radio shack or online. Even Big Grocery Stores have them. They cost any where from 20 cents a piece online to close to $5 dollars at radioshack.
Electrical tape- About 5cm. You could even use duct tape.
Shell- Any shell that is big enough to fit an LED in.
Assembly
Assembly is simple.
Just make an LED Throwie. Then Stick it inside the shell and your done. It looks great and is a great night light/ mood light.
Thanks for reading!
Joe R
Please rate and comment on my instructable. Thank you!
Shouts to :T3h_Muffinator (Your cool!)
Just make an LED Throwie. Then Stick it inside the shell and your done. It looks great and is a great night light/ mood light.
Thanks for reading!
Joe R
Please rate and comment on my instructable. Thank you!
Shouts to :T3h_Muffinator (Your cool!)