How to Make a USB Fan
Hello everyone this instructable is fun to make.
I made it in about 2 minuts.
But there is not enough power from the USB port so the fan spins fast but not fast enough.
sorry about that but it produces enough thrust to move a piece of 4mmX4mm paper.
I used some images from the web because i couldn't take the right photos.
I made it in about 2 minuts.
But there is not enough power from the USB port so the fan spins fast but not fast enough.
sorry about that but it produces enough thrust to move a piece of 4mmX4mm paper.
I used some images from the web because i couldn't take the right photos.
Get the Parts and Tools
you will need:
1 brushless fan
screwdriver
1 USB cord
soldering iron
solder
sticky tape
2 paper clips
1 brushless fan
screwdriver
1 USB cord
soldering iron
solder
sticky tape
2 paper clips
Putting It Together
here you will be putting it together
1-connect the wires from the fan to the USB cord.solder or twist
2-wrap the tape around the connections to stop short circuts.
3-bend the paper clips to form legs and screw them in place.
1-connect the wires from the fan to the USB cord.solder or twist
2-wrap the tape around the connections to stop short circuts.
3-bend the paper clips to form legs and screw them in place.
Testing
warning it might blow up your computer if not built propely.
just joking :-)
just joking :-)