Iron Man Mark IV Paper Helmet
I found in this 3d Model in google stetchup. I wanted to see in my shelves a real one.....ok a similar.
Downloads
Supplies
Paper 200g/m2 11 pcs, exluding fron page and instruction page
Scissor
Paper glue
Fast glue
Scale
Empty ball pen or envelope opener
Painting Sray Primer
Painting spray RAL1012
Painting spray RAL3020
Painting spray RAL1016
Cut Out the Pieces
After the cutting process, bend the flaps according to the line types.
Build a Front and Back Side of the Helmet Separately
Attached manual includes 2 main blocks the front - and back side of the helmet.
Add small paper glue to the flaps one by one. Follow the numbers on the connected surfaces
After the Glue Job, Ready to Paint
After your crafting job, use a primer paint to complete assembly.
Finish the Top Layers
Start with the "gold" color on the front and wait for drying. Use masking tape before you paint the "red" color.
If the 2 colors and mixed on the edges, use a knife to remove it.
Finally paint the eyes with "yellow" and enjoy your new creatures in your house or garage!