Jump Lift, a Knex Ball Machine Lift

Hello knexers!

This is the last of 4 new lifts all first seen in my knex ball machine Paradox.
It's a small lift that was used to lift the balls from the low white floor to the high white floor, but you can use it like you want.

You can make this lift stronger by adding more than 1 rubber band, and it also depends on wich rubber band you're using.
That's the reason why I didn't make an exit for this lift: The height and distance of the balls will be different for everyone.

If you build this lift, read every image note! It will help you a lot!
If you have any problems or questions, feel free to comment or PM me.

I hope you like it and have fun with building!

~Sandroknexmaster~

video:

If you want you can count the pieces before you start building.
Here is a list with all pieces included in this lift, named by their original color:

RODS:

Green: 24
White: 7
Blue: 25
Yellow: 8
Red: 2

Total rods: 66

CONNECTORS:

Dark-grey: 2
Light-grey: 3
Orange: 6
Red: 4
Green: 1
Yellow: 7
White: 2
Purple: 28
Blue: 4

Total connectors: 57

OTHER:

Blue spacer: 7
Silver spacer: 9
Tan clip: 9
Y-clip: 4
Small blue gear: 2
Medium red gear: 2
Motor: 1
Rubber band: 1 (or more)

Total other: 35


Grand Total: 158

This is the base structure for the lift.

This part contains the motor and most of the gears.

The Entrance. The balls will wait on this track before they will jump in the air.

This little arm will launch the balls in the air.

This is the Axle. At the end, we will also add the rubber band(s).