Knex Crane

Not much to say about this. It's a pretty standard crane with a crank handle for maneouvring the hook up and down. It can lift a decent amount of stuff if you modify the hook but I mainly use it as a display piece like my eiffel tower. Hope the instructions are okay.

Happy building =)

piece list coming soon

sorry about the delay

1. get this
2. build this
3. add these rods
4. add these rods
5. build this
6. add it on
7. build this
8. add this on

1. get this
2. build this
3. add this on
4. add on these rods
5. get these pieces
6. add this
7. ad the wheel
8. add this
9. add this
10. build this
11. it should look like this
12. put this on
13. add these rods
14. build this
15. add it on
16. how its used

please make sure you have attached the red rods below the crank as I forgot to take a photo of them. sorry.

be warned this is quite avery long step

1. get these pieces
2. build this
3. add the rods
4. build this
5. add the rods
6. arrange like this
7. connect them together
8. get the same pieces for the second part
9. build the same thing but without the rods
10. get both parts
11. get these pieces (I know there's a lot of spacers)
12. add this
13. add this
14. clip it together like this
15. get these pieces
16. build this
17. attach it on
18. add this
19. done

YAHOOOOOO!!!! WE'RE GETTING CLOSE

1. get this
2. get this
3. get this
4. all the bits together
5. connect these bits like this
6. connect the last bit like this

1. cut string
2. get these pieces
3. build this
4. add this
5. put it together
6. add string
7. tie it on
8. it should go over like this
9. make sure it goes through these pieces

hover over the box on the picture