Knex Gun: Peacekeeper

Hey guys, this is my new knex gun, The Peacekeeper. As you can probably see, there are lots of awesome features, such as: quick removing red dot sight, nice sights, large mag capacity, long pin pull, good range, easy to build and very accurate. However there are some bad points to this gun, such as: very piece consuming and require's cut pieces to function.

NOTE: I RECOMMEND THAT YOU GET ALL THE PIECES ON THE PIECE LIST BEFORE YOU START BUILDING.

Piece count

Rods

278 Green rods

103 White rods

19 Blue rods

2 Yellow rods

1 Red rod

1 2.6cm cut rod

11 3.4cm cut rods

8 1.8cm cut rods

Connectors

42 White connectors

6 3D blue connectors

112 Yellow connectors

7 Green connectors

57 Red connectors

10 Grey, two way connectors

43 Orange connectors

29 Purple/ grey connectors

4 3D grey connectors

4 Yellow race track connectors

Miscellaneous

10 Tan clips

8 Blue clips

13 Y clips

1 Female socket

2 Blue hinges

2 Black hinges

28 Blue spacers

4 Grey spacers

20 Black caps

14 Ends of cut white rods, these are optional.

here you are just building the right panel, second picture, the cut rods are necessary.

in this step you will make all of the internals including the handle, if you are stuck on something just ask me.

in this step you are making the magazine, you will need tape for this, also if you get stuck, just ask me.

in this step, you will be building the sights and the red dot sight, if you are stuck or need help just ask me in the comments.

CONGRATULATIONS, YOU HAVE COMPLETED THE GUN. GO AHEAD AND ENJOY, PLEASE DO NOT SHOOT THIS AT ANYONE, IT REALLY HURTS.