Knex Monstertruck

This is my knex monstertruck that i made a few years ago and was going to post on my old acccount but never got around to it. So now i have some spare time i will post. First off it has suspension (although it is prone to breaking if dropped), working stearing and the bonnet copens to reveal an engine(just for show). The doors can open and a knex man can fit inside but this is mainly model is mainly for show.

These pictures are quite old so some may be missing or be bad photos.

So here are the pics so get making!!


And be sure to rate, comment, subscribe and be sure to check out my other creations.

This is the base and suspension

1-make this
2-make
4-make
6-make
7-attach 1 to 2
8-attach 4 to 7
9-attach 6 to 8

(make 2)
10,11,12-make these
13-attach 11 to 12
14,15-attach 10 to 13
16,17,18-add this

19,20,21-add the lacky band here

22,23,24,25,26-add wheel

27,28-done

29-a full picture of the steering
30,31-better pictures of rear (or front if you dont want it to turn)

1,2,3,4,5,6-make these
7-attach 3 to 5
8-attach 4 to 5
9-attach 1 to 8
10-attach 2 to 9
12-attach 6 to 10
13-done

This is the longest and hardest step. Try to follow the pictures although they aren't too clear.

1-make
2-attach parts from 1
3,4,5,6,7-try to make whats in the pictures

8,9,10,11,12,13-make these
14-attach 9 to 13
15,16-attach 8 to 14
17-attach 11 to 16 (repeat for other side)

18,19-make
20-attach 18 to 19

21-attach 9
22-attach 20 and 7 to 17(sorry but this is the best picture i found)

1,2,3,4-make these
5-attach 1 to 2
6-attach 3 to 4
7-attach 5 to 6

1,2,3-connect front to rear
4-attach top
5,6-attach chassis to base

now you should be finished and if you need any help please message me.