Knex P90
Finally! A powerful P90, and has good looks and is comfortable! It's quite powerful (45 feet) and shoots a green rod and a dark grey connector put together. Let's look at some PROS and CONS!
PROS:
-Good power
-Good ROF (1.5 seconds?)
-Comfortable! Yay!
-Looks good!
-Pretty strong
-Feels so perfect!
-no mag push
Cons:
-Magazine holds 3 bullets (can make mag longer, but then you need a mag push)
-Fake barrel isn't very strong....
-3 broken parts. ( you can probably get it to work with just 2......)
Build!!!!!
PROS:
-Good power
-Good ROF (1.5 seconds?)
-Comfortable! Yay!
-Looks good!
-Pretty strong
-Feels so perfect!
-no mag push
Cons:
-Magazine holds 3 bullets (can make mag longer, but then you need a mag push)
-Fake barrel isn't very strong....
-3 broken parts. ( you can probably get it to work with just 2......)
Build!!!!!
The Stock
The stock gives you support and the firing pin goes through here....
1: What you'll make
2: Make one of each
3: Make one of the top one, and one of the bottom one
4: Put 10 blue rods on the one shown in the pic.
5: attach the plate that you made two of on to the bottom.
6: add another plate
7: Finish by adding the last plate, and add white rods and tape. Also, build the things shown in the picture.
1: What you'll make
2: Make one of each
3: Make one of the top one, and one of the bottom one
4: Put 10 blue rods on the one shown in the pic.
5: attach the plate that you made two of on to the bottom.
6: add another plate
7: Finish by adding the last plate, and add white rods and tape. Also, build the things shown in the picture.
The Body
This is where the hopper and the looks are XD
Get buildin' Son!
1: What you must make
2: Build the panels, Build two of the smaller one.
3: Make this junk. Read image notes.
4: Add!!! Remember that dark grey connector ;)
5: Add s'more. Remember EVERYTHING!
6: Add the rest of the plates.
7: Make everything in the pic.
8: Add 1 plate.
9: Add the next.
10: add the last two, and put white rods where shown. Make piece thingy in the pic too.
11: put the thingy on, and add two green connectors :)
12: CONNEECCCTT!!!
Onwards!
Get buildin' Son!
1: What you must make
2: Build the panels, Build two of the smaller one.
3: Make this junk. Read image notes.
4: Add!!! Remember that dark grey connector ;)
5: Add s'more. Remember EVERYTHING!
6: Add the rest of the plates.
7: Make everything in the pic.
8: Add 1 plate.
9: Add the next.
10: add the last two, and put white rods where shown. Make piece thingy in the pic too.
11: put the thingy on, and add two green connectors :)
12: CONNEECCCTT!!!
Onwards!
BREEEEAAAAKKK!
Break time! Let's have a cupcake together :)
The Extras
Just build this stuff!!
Or else, I'm serious.
XD
Or else, I'm serious.
XD
Let's Build! Plus Bandingt
FUUUNNN!
Let's build. This gun is kinda tricky to put together.
Alright.
1: Blurrry! Well, get your stock, and the body. Put all the parts on the body.
2: Put that pin guide on the stock first, Then add that bendy handle and put a white rod with tape on it. Make sense?
3: Turn it over. Add that part you made earlier, and add two white rods. I don't know if tape is necessary. Read notes.
4: close up of the attachment here.
Let's build. This gun is kinda tricky to put together.
Alright.
1: Blurrry! Well, get your stock, and the body. Put all the parts on the body.
2: Put that pin guide on the stock first, Then add that bendy handle and put a white rod with tape on it. Make sense?
3: Turn it over. Add that part you made earlier, and add two white rods. I don't know if tape is necessary. Read notes.
4: close up of the attachment here.
Done!
Tell me if you like it!!