K'nex Shotgun (Instructions)

This is the instructable for my K'nex shotgun. I would recomend that you should build it, because it is a decent shotgun. Please rate, comment, and subscribe.

Here you will make the body of the gun.

Image 1 : Build these panels.
Image 2 : This is another view of the trigger mechanism.
Image 3 : Here is yet another view of the trigger mech.
Image 4 : Attach the other panel from image 1 to the stuff you just built.
Image 5 : Build these pieces.
Image 6 : Take the pieces you just built and put them in the places shown.

You are done with the body. Go on to the next step.

Here you will make the bolt and some other small things.

Image 1 : Build all these pieces.
Image 2 : Put on the pieces you just made like so.
Image 3 : Here is the other side of the bolt.
Image 4 : Take the other piece from image 1 and put it on the end of the gun after you put the bolt in.
Image 5 : This is the firing pin. Put tape on it to strengthen it.
Image 6 : Put the firing pin in the gun like so.

Have fun with this gun, and be sure to subscribe.

This is the vengeful aug's gun: