Knex Spas 12

by cazadactle in Living > LEGO & K'NEX

1957 Views, 0 Favorites, 0 Comments

Knex Spas 12

Knex Stuff 001.jpg
Knex Stuff 016.jpg
Knex Stuff 002.jpg
Knex Stuff 003.jpg
Knex Stuff 004.jpg
Knex Stuff 005.jpg
Knex Stuff 006.jpg
Knex Stuff 007.jpg
Knex Stuff 008.jpg
Knex Stuff 009.jpg
Knex Stuff 010.jpg
Knex Stuff 011.jpg
Knex Stuff 012.jpg
Knex Stuff 013.jpg
Knex Stuff 014.jpg
Knex Stuff 015.jpg
Hi!
Well after looking a airsoft shotguns with my friend I decided to have a look round instructables for a nice looking pump-action shotgun (not an actual shotgun but a more lookalike gun) and I was pretty disappointed :(. So I decided to have a go myself!

Well this is something which I hope is a big step forward for pump action mechanisms. I was really trying to make this gun more realistic than anything so for that reason I opted for a SEAR trigger mech. The firing pin is pushed back by the pump and then held in place by the trigger mech whilst the pump is moved back forwards to it's original position. The firing ram again returns to the pump and the whole thing is repeated. Unfortunately because of the complex pump mechanism there was no space to put a horizontal magazine behind the pump but it could be possible!

PROS:
-realistic looks
-SEAR mech hardly ever jams
-Low cap 4 round mag
-Real pump-action!
-True trigger!
-Sights (not shown)
-Sturdy

CONS:
-Terrible range (15ft max but remember this is largely a concept design)
-Elastics to hold the ram down 
-Mag at the front because that was where the only space was :(

Well to round off with some news, I think that I am going to try and remain making more realistic guns rather than guns that look crap and my next ible is a P90 so look out for that!

thanks as always!
-cazadactle