Knex Crossbow

this is my first ever instructable so please excuse any hard to follow directions. this is my "piece conservative" crossbow. it has a range of about 30ft shot flat and 40-50ft angled. it also feqatures a new type of trigger that works really well.
p.s. please rate and sub!

also check out my combat/tactical knife at; https://www.instructables.com/id/knex-combattactical-knife/

make/gather two of every thing although when assembling make in reverse
pic 6 make four 
pic 10 flip to under side

pic 1 make three
pic 2 make two
pic 3 gather nine
pic 4 assemble like this
pic 5 add the two other rails
pic 6 add these snowflake connectors
pic 7 dont forget the blue clip
pic 8 attach to bow like this
pic 9 another veiw

i know it  is too simple please elaborate and show me your own versions
pic 1 make two

do exactly as the pictures show and you should have no problems

i used two 8in bands that r broken but u can put two 6 or 8in bands together and just anchor them in the same places as shown
pic 4 it is crucial that when loading, that the band(s) r placed higher than the notch in the connector

now go out and have fun

First picture is of the creation by Blackhawk7992. The second picture is by mrknex3000 as well as the third being his new grip. If you build it please post a picture of it and I will put it in the instructable ASAP with credit to you of course, HAPPY BUILDING!