Knex Walther PPK

Walther ppk is the gun that James Bond uses. This gun is not completely original; it is based almost completely off of TheDunkis' "Mini-er TDS"

PS-
This is my first instructable, so bare with me.

Features:

• Size: 5.25" x 3.75"
• Range: ~ 20 ft.
• Accuracy: Very Consistent
• Pc. Count: Med. Low
• Mag Size: 5

This is the handle/ chamber.

1. Build these.
2. Add this. (wrong way in pic, face it the other way.)
3. Attach like this.

This is the trigger system.

1. Build these.
2. Attach here.
3. Add this.

This is the Barrel.

1. Build these.
2. Put together like this.
3. Attach here.
4. Add this.

Mechanics include: Ram, Mag. pusher, & trigger stop.

1. Build this.
2. Add tape and push the spacer up as far as possible.
3. Tape again.
4. Build this.
5. Put this in here.

This is were to put the rubber bands.

1. Set a red rod on top.
2. Put a rubberband on the trigger.
3. Put a small rubberband here. (front)
4. Put a small rubberband here. (back)
5. Put in the ram and add rubberbands.

This is how to load the gun. Make sure the grey connectors are lined up perfectly straight in the chamber. If they aren't adjust the bands on the mag. pusher to fix it.(it may fire two if you don't)

1. Materials.
2. Bullets face this way.
3. Loaded.
4. Cocked.

You're done! I hope you guys enjoy this gun as much as I have!

Special Thanks To-

+ TheDunkis
+ NickAwesome
+ and of course, me.



P.S.- I am not responsible for anybody who is harmed in any way through misuse of this toy gun.