Knife-makers Scribe

This is a step by step tutorial on how to make a knife makers scribe.

First cut out the body of the scribe.

Now that it's cut out drill the hole that the scribe holder will fit in.

Now drill a hole for the screw that will keep the scribe holder from sliding up and down.

Now tap the hole so that you can screw your bolt in so that the scribe holder can't move unless you loosen the bolt.

Now it's time to make the scribe holder.

Now drill the hole that will hold the scribe and the hole that will hold the bolt that will keep the scribe in place.

Now tap the hole on the bottom so you can put a bolt in to keep the scribe from moving. Put a set screw in the taped hole to keep the scribe from moving.

Now your finished. Assemble it all and you have yourself a knife makers scribe.