Laser Tips & Tricks: Fix Materials
by cartonus in Workshop > Laser Cutting
7570 Views, 23 Favorites, 0 Comments
Laser Tips & Tricks: Fix Materials
How to fixing materails on table of laser machine.
Press Down Material Using a Heavy Object
Press down the sheet material to the table laser machine using a hammer or other heavy object. Make sure that the laser head does not hurt the object while moving.
Use Simple Clamps of Plywood
Create simple clamps of plywood for fixing material on honey honey comb table. The upper part of the clamps should not exceed 5 mm.
Use Simple Clamps of Plywood
Create simple clamps of plywood for fixing material on blade table. The upper part of the clamps should not exceed 5 mm.
Use Magnets
Fix carton by magnets on honey comb table of laser engraver.
Do Not Fix Materials by Fingers!
Do not fix materials by fingers on table laser engraver!
Laser cut ideas at cartonus.com