Leather Cat Card Holder
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/Acrylic-template/acrylic-card-holder-pattern-A-111
The finished size is about: 4.3" x 3.5" x 0.6" (11cm x 9cm x 1.5cm).
Advice:
Hardware: 655 Snap x2, 10cm No.3 zipper x1, No.3 slider x1.
Leather: We advice 1.0mm (2.5oz) leather, size 22cm x 18cm.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/leather-tool-kit/leathercraft-tools-leather-craft-patterns-leather-art-leather-carving-tool
Let Me Show You How to Make a Close-end Zipper.
Cut All Leather Pieces From Acrylic Pattern and Punch Stitching Holes by Chisel, Here I Draw Some Decoration Lines Already, Sew One Side Cloth on Back Piece.
Then Sew the Other Piece on Front Piece.
Install 633 Snap on Grain Side of 1 Claw, and Glue 2 Claws's Flesh Side Together. Here Please Notice, Install Cap and Socket Together, I Had Split Cap Part to Get a Flat Cap.
Now We Can Install 633 Snap Eyelet and Stud Together on Face, Also Sew Nose on Face.
Now We Can Glue 2 Claws, Fold Front and Back Leather, Sew Pre Sewn Claws On, Here Please Notice That, When You Pre Sew Claw, Left an Opening, We Should Sew the Opening With Zipper.
Sew Face on Front Piece, and Sew Left Stitching Holes, Finish.
