Leather Clutch
You can download this pdf pattern from here:
http://www.leathercraftpattern.com/leather-clutch-...
The finished size is about: 11" x 7" x 2" (28cm x 18cm x 5cm).
Hardware: No.3 zipper 40cm x1, No.3 zipper slider x2, No.5 zipper 30cm x1, No.5 zipper slider x1, Fabric.
Leather: 2.0mm (5oz) leather about 33cm x 50cm, 1.0mm (2.5oz) leather about 50cm x 29cm.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...
First, Let Me Show You How to Make a Zipper.
Paint Glue on Flesh Side of Card Slot Around Card Slot Opening.
Fold and Glue Card Slot Lining on As Picture Show, Redo Step 2 and Step 3 Until Glue 3 Lining on Seams of Card Slot Leather.
Punch Stitching Holes in the Middle of Card Slot Leather and Sew It.
Sew Card Slot on Clutch Leathe.
Glue No. 3 Zipper on Clutch Lining.
Fold Zipper Pocket Fabric As Picture and Sew 2 Sides.
Draw Stitching Lines Around Zipper Hole.
Glue Zipper Pocket on Leather.
Sew Around Zipper Hole, the Zipper Pocket Is Finished. Here You Can Do the Other Zipper Pocket of Back Surface Leather.
Thin Edge of Receipt Slot Leather, Fold and Glue, Then Stitching the Top Stitching Line.
Sew Other 3 Sides on the Other Piece of Clutch Lining.
Rough All Edges Before Sewing, Then When You Paint Glue On, They Will Be Glued Firmly.
Thin the Bottom Edge of 2 Pieces of Clutch Surface Leather, and Sew Them Together With Bottom Strengthen Leather.
Thin the Edge of Top Surface Leather, Fold and Glue.
Sew 2 Pieces of Surface Together by Flesh Side Outside.
See How to Sew Bottom Construction.
Glue Redundant Edge on Flesh Side.
Converse Grain Side Outside.
Now We Put Sewed Lining Combination Into the Surface Clutch.
Sew No.5 Zipper Between Lining and Surface to Finish This Clutch.
