Leather Dairy
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/leather-acrylic...
The finished size is about: 4" x 5.7" x 1.2" (10.2cm x 14.5cm x 3cm).
Hardware: A7 size loose leaf binder x1, 10mm x 8mm Chicago screw or rivet x2, A6 size refill page x2.
Leather: We advice 2.0mm (5oz) leather for surface, size 15cm x 37cm, 1.0mm(2.5oz) leather for lining, size 10cm x 30cm.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...
Because We Have the Basic of A-133 Dairy Making, for This One, We Have a Quick Instruction. Cut All Pieces From Acrylic Pattern and Punch Stitching Holes by Pattern.
Fold the Passport Slot and Align the Edge of Main Body, Sew Them Together, You Can See the Pen Slot Is Finished Too.
Sew Card Slot on Card Slot Back Leather, Only Sew Middle Stitching Lines.
Sew Card Slot Back Leather With Surface Leather.
Install A7 Loose Leaf Binder on and Add Refill Pages, the Dairy Is Finished.
