Light Up Wood Box Keychain

We made a small cube keychain with symbols on each side of the box. There's an LED on the inside of the box, which can be turned on by a switch on top of the box. We made this keychain because it's a cool addition to put on bags, backpacks, etc.
Supplies

Plywood
LED
Hot Glue
3V Lithium Battery
Switch
Keychain
Laser Cutter
Solder
Cut Wood Pieces

Laser cut 4 x 4 x 4 cm box and 1 x 2.5 x 2.5 cm box of medium bass plywood using MakerCase.
Laser Cut Designs
-pdf.jpg)
Laser cut chosen designs onto the individual walls of the 4 cm box and 1 cm hole onto the top of box
Build Box
Hot glue 4 cm box together and smaller box together
Switch & LED
-pdf.jpg)
Solder the LED to the wires of the switch
LED in Box
-pdf.jpg)
Hot glue the LED through the hole on the top of the box
Cover Wires
-pdf.jpg)
Cover the wires by placing the smaller box on top of the larger box. Hot glue the switch to the top of the box
Attach Keychain
-pdf.jpg)
Hot glue the keychain to the top of the box
Finished!
-pdf.jpg)