Make OTG Cable at Home

Hii friend,

Today I am going to make OTG Cable at home.

Let's get started,

Components required -

(1.) USB Type A - female

(2.) Micro USB Male Connector

(3.) Wire

First open micro USB male connector and solder two wires of right side of micro USB male connector as you can see in the picture.

Next solder all wires in female USB as shown in the picture.

Now Solder wires in Micro male USB as shown in picture.

Now Colline USB Cable with glue as picture/as your desire.

Now USB Cable is ready to use.

Plug USB cable to your phone and use it.

If it is not supported then go in the setting of phone and find more setting as picture

Next find Reverse charge and OTG and do enable.

Now your OTG is ready to work.

you can use it to transfer data.

After enable Reverse charging and OTG, the LED of Card reader/pen drive will glow as shown in picture.

Thank you