Mermaid Scales

by MsMaoMaoz in Craft > Costumes & Cosplay

4584 Views, 26 Favorites, 0 Comments

Mermaid Scales

SFX SCALE LOOK
Screenshot (155).png
Screenshot (115).png
Screenshot (116).png
Screenshot (117).png
Screenshot (118).png
Screenshot (119).png
Screenshot (120).png

HEY GUYS! So, I decided to do some sfx scales. I think these scales would help top off any mermaid/snake/dragon Halloween look you have, and they don't HAVE to be on your leg it could be on your arm or face. haha. SO YEAH! Youtube.com/msmaomaoz to help support me! <3

Step One

Screenshot (121).png
Screenshot (122).png
Screenshot (123).png
Screenshot (124).png
Screenshot (125).png
Screenshot (126).png

You need to make a hole in your leg! First I took some liquid latex and cotton balls. I thinned out the cotton ball and covered it in liquid latex and made a very rough round shape. I made sure to push up the inside and smooth down the outside of it. and I let it dry before moving on to the next step.

Grossness

Screenshot (127).png
Screenshot (128).png
Screenshot (129).png
Screenshot (130).png
Screenshot (131).png
Screenshot (132).png
Screenshot (133).png

To make the leg around the open area look gross and infected I took cream makeup, these are called makeup stacks that you can get at walmart or party city. I used the yellow and blended it all around the outside. After that I took the red and patted it on with a black stipple sponge and then grabbed a brush to push the red into the deeper parts. Next I took a tad bit of blue and purple and randomly dabbed it around.

Veins

Screenshot (134).png
Screenshot (135).png
Screenshot (136).png
Screenshot (137).png
Screenshot (138).png
Screenshot (139).png

I used this blue body paint from Mehron and made sure it was REALLY watery and drug it out with wiggly lines and tapped it in to make veins. =P

TEAL

Screenshot (140).png
Screenshot (141).png
Screenshot (142).png

I took this teal from Mehron to fill in the holes.

Scales

Screenshot (143).png

I took the same blue we used on for the veins to paint on the scales. I didn't water it down as much though.

Shadowing

Screenshot (146).png
Screenshot (144).png
Screenshot (145).png
Screenshot (147).png
Screenshot (148).png
Screenshot (153).png

I took a few colors from urban decays electric pallet and I used them to shadow around every scale.

Black

Screenshot (152).png
Screenshot (149).png
Screenshot (150).png
Screenshot (151).png

As I was moving up I decided I need to add some black randomly to some of the scales.

Highlight

Screenshot (154).png

I used some light green body paint from mehron to highlight the scales. AND THAT'S IT!