Mini Crossbow

Hello people! In this instructable I will show you how to make a mini crossbow. Of course streaking burning matches at your own risk!

You need:

• 2 popsicle sticks
• rubber band
• bottle cap
• Matches
• Hot glue gun
• Soldering iron
• Nippers
• Marker

Draw a cross on the bottle cap. Mark on each end of the cross 1 centimeter on the side of the bottle cap. Seen from above, the upper and lower approximately 3 millimeters from the top, the left and right 5 millimeters from the upper edge.

Use the soldering iron to open the markings on the sides. These are about 11 millimeters wide.

Push the popsicle sticks now through the holes in the bottle cap. Glue them with hot glue.

Make a hole (2 mm) in the front and back of the cap with the soldering iron.

Make a small indentation on the left and right of the popsicle stick with the nippers. Put the rubber band around it and put him behind the bottle cap.

Ready! Great shooting fun !!