Mini Lego Guitar
This is how to make a mini Lego acoustic guitar.
The Pieces
The pieces needed are listed above.
The main color i used is orange, but you can use whatever color you want.
The main color i used is orange, but you can use whatever color you want.
The Neck
First you attach the hinge plate to the 1x6 as shown.
Put a small incline brick on the top of the hinge piece.
put the stud below that.
Strings
Put the vent on the bottom of the 1x6 as shown.
Put the connector peg into the 1x2 brick.
Add the 2x2 on the 1x2 brick as shown.
Put two curve bricks on the 2x2.
put the other two incline bricks on the front of the 2x2 as shown.
Add the center stud brick on the two curve bricks.
put that whole part on the bottom of the 1x6.
Put a connector peg into the connector peg brick. You should make two of these.
Add a curve brick on the bottom of the part you just made.
Add another on the bottom of that.
Add the other connector peg and brick part you made earlier on the bottom of that.
This next part is tricky, you have to put the whole thing on the back where it fits as shown.
Finshed!
Flip it over and you are done!
Enjoy!
Enjoy!