Miniature Pokeball Terrariums

by chimerical in Craft > Reuse

47 Views, 1 Favorites, 0 Comments

Miniature Pokeball Terrariums

PXL_20230907_005059410.jpg
PXL_20230907_005700749.TS
PXL_20230828_054352051.TS_exported_5598_1693346491683.jpg
PXL_20230907_005658375.jpg
PXL_20230907_005455221.jpg

There are over 1000 Pokemon now! Astonishing, actually. That also doesn't count all 4 billion Spinda forms. But the real important thing here is that this means, when you ask your friends if they have a favorite Pokemon, they are all going to have different answers, which means ... you now have over 1000 gift ideas. Because the lack of ideas is really why we're all here y'know.

I can't take credit for the core idea of this--I don't know exactly where it originated, but it's fairly common in the fandom to have a little desktop Pokeball with a clear lid and Pokemon inside doing a cute little thing. I can, however, take credit for once again looking at a really nice, polished Pokeball Terrarium at a con for a reasonable price and deciding that:

1) It needed more features and

2) I was going to try to make it mostly using things I already had lying around.

Spoilers, (2) ends up being a complete lie as always, but the amount of new stuff introduced here was relatively small, and this project was so popular that I got ... bonus projects, and ended up making a couple more for my friends! You will see multiple different terrariums/Pokemon in some of the pictures as a result.

In general, I think the trick to miniatures is recognizing similar shapes and being creative with what you have, so if you can't identically match my junk drawer, that's okay! You're probably also not going to make exactly the Pokemon I'm making in exactly the scene I'm making either because, again, everyone has a different favorite Pokemon. This is really about looking at small objects and wondering what big objects they could look like. A world of dreams and adventures awaits!

Supplies

  1. Pokemon!
  2. There's official merch statues that are probably a decent size, but,
  3. If you're an unhinged lunatic who wants "Dratini sitting in a stool" (hi), you'll want Polymer Clay. Any is probably fine; I used Sculpley oven-bake clay (white) for this. If you're using clay, you'll also want:
  4. Some sort of thing for shaping. I had some nubbin-shaped tools (think, the small end of a paintbrush or tweezers) and q-tips for texturing, or you can buy professional tools.
  5. Some sort of paint. I've had something like this and some generic craft paintbrushes lying around my closet for years for odd jobs like this--Pokemon are different colors and this isn't Warhammer, so if you mix Rattata's purple a little wrong, no one will banish you for it.
  6. Foil and a small bit of armature wire. This is probably optional, but if you have friends whose favorites are long and skinny delicate guys, Dratini, this is helpful!
  7. An oven or other way to take your clay to 130C for ~an hour.
  8. Pokeball!
  9. The base is 3D printed. I've uploaded two versions of the files: there's a plain base that just has the white base/button, and there's a modified multipart of the base that has a removable cover and access point for batteries and a switch, so you can run lights.
  10. Sandpaper for finishing, glossy white spraypaint, and glossy black acrylic paint is helpful here, but not required.
  11. The STLs provided for the removable cover are sized for 3mm brass inserts and 3mm flathead screws, but you could pivot to a similar size like 1/4-20 or 4mm.
  12. The top shell is an 88mm clear ornament shell. This is the only thing I bought specifically for this project, and it does come in a 3pack, so you're definitely signing on to make 6 guys, but! That's Pokemon. You'll need to cut off the little nubbin for hanging the ornament, as this will be used as the top clear shell instead.
  13. Lights!
  14. I have embarrassingly had enough random battery holder/switch combos lying around that I do not know where this came from. The voltage on this project is so tiny that you definitely don't need anything more than a coin cell; I think this would probably be fine.
  15. Mini LEDs. Likewise I had these leftover from something else, but something like this would be fine. Part of the strategy here is hiding the LEDs somewhere where you can't see how the wires or casing, so don't worry about that.
  16. Soldering iron and heat shrink.
  17. Decor!
  18. There will be a section on this! Yours will probably not match mine, but in general some helpful bits and bobs are:
  19. Flexible wire (I used 18awg black electrical wire for a lot of this, or florist wire and a sharpie)
  20. Fake floral bouquets--I got mine at goodwill; what you're looking for is something with a lot of tiny leaves and different colors. We're mostly going for texture here!
  21. Cardboard/craft knife
  22. Superglue or hot glue
  23. Model flock--this is the fluffy stuff that I used to make tree/leaf textures. You can also get away with just cutting up floral bouquets and laying the leaves on overtop
  24. Paint
  25. 3D printer (no kill like overkill)
  26. Beads
  27. String

Sculpting and Painting Your Pokemon

PXL_20241215_184646044.jpg
PXL_20241215_205343989.jpg
PXL_20230607_032610086.jpg
PXL_20230607_035507307.jpg
PXL_20241216_045225939.jpg
PXL_20230828_021618685.jpg

Zero years of art school and my last formal clayworking experience was in the sixth grade. We welcome all skills here! I'm also not diving too specifically into how I made specifically my guys in this diorama (Dratini, Rattata, and Caterpie), as I'm assuming that you/your friends will probably have different favorites than my friends. Apologies in advance for the "draw the rest of the owl" kind of vibe that this section carries as a result.

In general, with polymer clay and little guys:

  1. Anything thinner than ~3mm x 10mm (so either smaller than 3mm thick or longer than 10mm long) is at risk of breaking in the oven or during handling. I would use a bit of armature wire into the shape I wanted and then press the clay around it, which makes it way stronger.
  2. Anything thicker than 15mm is kind of just ... a lot of clay? For polymer clay I think you can just slowbake it and you'll be fine, but I was really scraping the bottom of my clay barrel here. I balled aluminum foil into similarly-shaped slugs and then covered them in clay for the larger parts; the foil stays dimensionally stable at baking temperatures and you're able to get a more even cook. You can skip this step and just bake the heck out of your clay as well, but some of us started this at the very last minute and didn't have a ton of choice here.
  3. Really thin features like fins, teeth, or antennae don't actually have to be clay. You'll paint this later! I made my Dratini head fins out of three little pieces of wire that I stuck onto masking tape and then painted. Or, when I wanted to make Exeggutor and all of its 12 million tiny leaves, I cut longer pieces of wire for the center frond/vein and then cut bits of masking tape over it into triangle shapes. This let me get the kind of bend/shape I wanted, and when I painted it, it looked like all one thing.
  4. I didn't have any issues putting Exeggutor's leaves in the oven, but if you're concerned about anything catching fire, you can also assemble the whole thing while the clay is soft, gently pull out all of your extra parts, and then glue them back after you've baked the piece.

I think it's helpful to mentally break down a subject into different shapes. So Rattata is kind of one lumpy oblong body, with a rounder head, and little pointy ears. Weezing is mostly a round anguished guy, with some round lumps. We can make these all separately and then smudge them together to make the whole thing; this is way more approachable than trying to shape the guys wholecloth.

Pokemon are also super interesting from a design perspective because they have kind of super obvious features, like this is the whole thing they're built around. For Rattata, I think it's the teeth! The teeth are way too thin to sculpt for my big hands. So I used a little chunk of wire and some masking tape, and I ended up making them a little oversized since I think that's kind of the most obvious feature for Rattata.

Finally, I think my number one rule of doing things that you aren't super confident is in full force here--try to shape the scene around what you're comfortable with! I couldn't make Breloom's legs, so I stuck her behind a cafe counter. She has no legs. No one will ever know (until now). It's okay! As long as you keep the most recognizable parts of your subjects in focus, people's brains are good at filling in the rest, and you can typically avoid agonizing over sculpting every single fold of Jynx's dress or something.

Making the Pokeball

ptr-2.png
ptr-3.png
ptr-1.png
PXL_20230818_050247898.jpg

3D Print files are below. This is fairly straightforward; I printed these in white plastic and then sanded and painted the outside in glossy white. I also found that the lighter plastic reflected light in a weird way that I didn't like, so I painted the inside black (anything sufficiently dark will do).

The multipart/battery files have a tray that holds the top and bottom together. I covered up the fastening hardware with strategically placed mini flower pots, but in general if you hide them under Pokemon or furniture and paint them the same color as your base, you'll be good to go.

For the simplified bases, you'll want to trace/cut a round piece of cardboard to serve as the bottom of your scene.

In both versions, I put a rock at the bottom of the base before fastening everything together. I think this just adds some weight and makes the final product feel nicer and heftier. Totally optional.

Lights!

PXL_20230728_004819635.jpg
PXL_20230820_022329858.jpg
PXL_20230828_054650659.jpg
PXL_20230828_054352051.TS_exported_5598_1693346491683.jpg
PXL_20230828_054428867.TS_exported_9843_1693346517315.jpg
PXL_20230820_022701496.TS
PXL_20230820_023054486.TS

If you're doing the version with lights, it's helpful to do this step first so you can craft your scene around how the lighting will work. I think in general, lights in miniatures look better:

  1. As actual aspects of the scene (so for example, a lantern or lamp post)
  2. As diffuse general lights (so at the base of something, but covered up so the specific light source isn't visible from the top)

Mini LEDs are basically way brighter relative to their size than they would be normally, so it's important to either emphasize them by making them the focus of the scene, or hiding them. I found it helpful to just play around with my lights and half-finished props before painting and gluing everything.

LEDs have directions, so make sure you check your wiring diagram before soldering, and test before assembling :p This is a super simple circuit and you should basically just be wiring the positive ends of your LEDs to each other and the battery. Positive ends are typically red or trimmed longer.

Decor!

PXL_20230828_002312923.jpg
PXL_20230820_022339871.jpg
PXL_20230828_054921495.jpg
PXL_20230818_050310196.MP.jpg

This is secretly an art project and is about balance. Your scene will look super satisfying if you have a mix of:

  1. Rigid/geometric elements--like round stools, walls/counters, the repeating shingles on the roof, etc
  2. Organic/random elements--like little flowers, random leaf/foliage patterning, clumps of dirt, and, of course, your Pokemon.

In general, you want your rigid elements to look very straight/rigid. For structural things like walls, this means it's helpful to cut them out of wood or 3D print them so they keep a super precise shape. I think it would be super fun to go back and make the shingled roof out of bits of a drinking straw or something, but again, I procrastinated a ton on this project and just ended up overkilling it with the 3D printer. Included the STLs for those.

For decorative rigid elements, like flowerpots, mugs, bowls, or the base of lanterns, this means getting a little creative! You could craft these out of clay, but it'll be really obvious if they don't look perfectly round. I had a multipack of random buttons and beads lying around that I think were perfect for this. You can also combine shapes, like a small bit of wire onto a bead to form the handle of a mug.

I also got a ton of mileage out of old sewing clasps (not exact link). They're so round and weird shaped when they're at miniature scale; they could be anything--a bowl for ramen, or the base of a lantern with some paper.

For organic/random elements, I think quantity is way better than quality. Foliage is super helpful at hiding all sins here. I got mine at goodwill, so no PN unfortunately, but you'll want to look for something with a lot of greenery/filler flowers, like this, and then cut off small ~10-40mm segments (varying the lengths is super helpful to make things look more organic) and array them around the piece. Trust the process--if it looks too barren or weird, just keep adding more!

Voila!

PXL_20230907_005700749.TS

Do better than I did and take nicer photos and videos than I did to memorialize all your hard work. You're gonna be so sad writing up your documentation otherwise.

Let me know how it goes! I think this is a super approachable project and tried to make it as easy as possible, and I'd love to see how your adventures go!